Part 1. Installation
Prev		Next

Part 1. Installation

Table of Contents

1.1. About this Manual
1.2. Factory Settings

2. Installation on Own Hardware

2.1. Hardware Selection

2.2. Installing as a Virtual Machine

2.3. Location

2.6. Installation of the operating system

2.6.1. Installation from a USB flash drive
2.6.2. Installation from DVD
2.6.3. Start of the installation
2.6.4. Serial console
2.6.5. Solving Compatibility Problems

3. Installing as a Virtual Machine

3.1. Comparison to Real Hardware

3.1.1. Inconsistent performance speed
3.1.2. Lower I/O Performance
3.1.3. Contact with Unfiltered Network Packets

4. Installation on VMware vSphere Hypervisor 4 (ESXi)

4.1. Virtual Machine Configuration
4.2. Virtual Machine with Direct Internet Access
4.3. Installing the Intra2net System

5. Installation of Microsoft Hyper-V on Windows Server 2012 R2

5.1. Virtual Machine Configuration
5.2. Installation of the Intra2net System

6. The Console

6.1. Intra2net Appliance Micro
6.2. Network Cards
6.3. DNS and DHCP
6.4. Firewall Emergency Mode
6.5. Restore to Factory Settings
6.6. The Root Password
6.7. The Linux Shell

7. The Web Interface

7.1. Accessing the Web Interface
7.2. License Code
7.3. The Main Page
7.4. The Queue
7.5. The Configuration Check
7.6. Shutdown necessary

Prev		Next
Intra2net Administrator Manual	Home	1. Chapter - Welcome